Catalogue — 13
Instrumentation Engineering
Process measurement and control
01 — In This Category
46 Items
Open an item for details, or add it to your enquiry list and send the whole list from the contact page.
-
01
4-Bit Universal Shift Register Trainer
A digital electronics trainer module built around a 4-bit universal shift register IC used to demonstrate serial and parallel data shifting operations in digital logic laboratories.
-
02
8051 Development Board Trainer Kit
A microcontroller trainer kit built around the 8051 architecture used to teach embedded programming, interfacing, and I/O control in microprocessor laboratories.
-
03
AC Tachometer / Tachogenerator
A rotational speed transducer that generates an AC voltage proportional to shaft speed, used in instrumentation laboratories to teach speed measurement and sensor calibration.
-
04
AI-Based Robotic Arm (6 DOF)
A six-degree-of-freedom robotic arm with AI-assisted control used to teach robotics kinematics, motion planning, and automation concepts in instrumentation and robotics laboratories.
-
05
Analog and Digital IC Tester
A bench instrument used to test the functionality of analog and digital integrated circuits by verifying logic states and output responses against expected truth tables.
-
06
Biomedical Trainer Kit
A trainer kit used to demonstrate the acquisition and processing of physiological signals for teaching biomedical instrumentation principles.
-
07
Bourdon Tube Trainer with LVDT
A pressure-measurement trainer that couples a Bourdon tube sensing element with an LVDT to convert mechanical deflection into an electrical signal for teaching pressure transducer principles.
-
08
Capacitive-Type Level Measurement Setup
A laboratory setup using a capacitive probe to measure liquid level by sensing changes in capacitance, used to teach capacitive level-sensing techniques.
-
09
Cascade Control Trainer Setup
A process control trainer with primary and secondary control loops used to teach cascade control strategy and controller tuning in process instrumentation laboratories.
-
10
Class A Power Amplifier Experimental Kit
An experimental kit built around a Class A power amplifier circuit used to study biasing, gain, and distortion characteristics in analog electronics laboratories.
-
11
Class B Push-Pull Amplifier
A demonstration circuit of a Class B push-pull amplifier configuration used to teach crossover distortion and power-amplifier efficiency concepts.
-
12
Class A, B, C, D, E Commutation Trainer Kit
A power electronics trainer kit that demonstrates Class A through Class E thyristor commutation circuits used to teach SCR turn-off techniques.
-
13
Control System Trainer
A trainer module used to study open-loop and closed-loop control system responses, including stability and transient behavior, in control engineering laboratories.
-
14
Control Valve Trainer Setup
A process instrumentation trainer built around an actual control valve used to teach valve characteristics, actuation, and flow control response.
-
15
Controlled Rectifier with R and RL Load
A power electronics experiment setup that demonstrates the output waveform of a controlled rectifier under resistive and resistive-inductive loads.
-
16
Cut-Section Model of Different Valves
A cutaway physical model exposing the internal construction of various valve types, used to teach valve design and working principles in instrumentation laboratories.
-
17
Dead Weight Tester
A pressure calibration instrument that applies calibrated weights to a piston-cylinder system to generate known reference pressures for calibrating pressure gauges and transmitters.
-
18
DIAC Trainer Kit
A power electronics trainer kit used to study the breakover and triggering characteristics of a DIAC in triggering circuits for thyristors and triacs.
-
19
Digital Interactive Smart Board
An interactive touch-enabled display board used for digital classroom instruction and demonstration of laboratory concepts in engineering departments.
-
20
Digital Storage Oscilloscope
A bench instrument that captures, displays, and stores electrical waveforms used to measure voltage, frequency, and timing characteristics of signals in electronics laboratories.
-
21
Dual DC Regulated Power Supply (30V, 3A)
A bench power supply providing two independently regulated 0-30V, 3A DC outputs used to power electronic circuits and trainer kits during laboratory experiments.
-
22
Dual DC Regulated Power Supply (30V, 5A)
A bench power supply providing two independently regulated 0-30V, 5A DC outputs used to power higher-current electronic circuits and trainer kits in laboratory experiments.
-
23
ECG Trainer Kit
A biomedical instrumentation trainer kit that demonstrates the acquisition, amplification, and filtering of electrocardiogram signals for teaching medical electronics.
-
24
Electronic Workbench
An integrated bench setup combining power supplies, signal sources, and measuring instruments used as a general-purpose station for building and testing electronic circuits.
-
25
Flow Measurement Setup
A laboratory rig used to demonstrate fluid flow-rate measurement techniques and calibrate flow sensors in process instrumentation courses.
-
26
Function Generator (10 MHz)
A signal-generating bench instrument capable of producing sine, square, and triangular waveforms up to 10 MHz for testing and calibrating electronic circuits.
-
27
I-to-P and P-to-I Converter Trainer Kit
A process instrumentation trainer kit that demonstrates current-to-pressure and pressure-to-current signal conversion used in industrial control loops.
-
28
IGBT Trainer Kit
A power electronics trainer kit used to study the switching and characteristic behavior of an Insulated Gate Bipolar Transistor.
-
29
Load Cell Trainer Kit
A trainer kit built around a strain-gauge load cell used to teach force and weight measurement principles in instrumentation laboratories.
-
30
LVDT Trainer Kit
A trainer kit built around a Linear Variable Differential Transformer used to teach displacement measurement principles in instrumentation laboratories.
-
31
Multifunction Calibrator
A precision instrument that generates and measures multiple electrical and process parameters used to calibrate laboratory instruments such as multimeters and transmitters.
-
32
Negative Feedback Amplifier Trainer
An analog electronics trainer used to study the effect of negative feedback on gain, bandwidth, and stability of amplifier circuits.
-
33
P, PI, PD, PID Controller Trainer Kit
A control systems trainer kit used to study and compare the response of proportional, proportional-integral, proportional-derivative, and PID controller configurations.
-
34
Parallel Inverter Trainer Kit
A power electronics trainer kit that demonstrates the operation of a parallel inverter circuit used to convert DC input into AC output.
-
35
PLC-Based Conveyor System Kit
A trainer kit that uses a programmable logic controller to automate a scaled conveyor system used to teach industrial automation and sequencing logic.
-
36
PLC-Based Elevator Kit
A trainer kit that uses a programmable logic controller to simulate elevator control logic used to teach automation sequencing and interlocking.
-
37
Potentiometer as an Error Detector
A demonstration setup using a potentiometer to generate an error signal by comparing reference and feedback positions, used to teach error-detection principles in control systems.
-
38
Power Electronics Lab
An integrated laboratory setup comprising power semiconductor devices, converters, and measuring instruments used to teach power electronics conversion and control principles.
-
39
R, RC, UJT and Pulse Transformer Triggering Trainer Kit
A power electronics trainer kit that demonstrates R, RC, UJT, and pulse-transformer triggering circuits used to fire thyristors in controlled rectifier and inverter applications.
-
40
RoboAnalyzer Robot Simulation and Research Software
Simulation software used to model, analyze, and visualize the kinematics and dynamics of robotic manipulators for robotics research and instruction.
-
41
Single-Phase Midpoint Cycloconverter with R and RL Load
A power electronics experiment setup that demonstrates single-phase midpoint cycloconverter operation for direct AC-to-AC frequency conversion under resistive and resistive-inductive loads.
-
42
Step-Down & Step-Up Chopper Trainer Kit
A power electronics trainer kit that demonstrates buck (step-down) and boost (step-up) chopper circuit operation used to teach DC-DC conversion principles.
-
43
Synchro as an Error Detector
A demonstration setup using a pair of synchros to generate an error signal proportional to angular misalignment, used to teach error-detection principles in control systems.
-
44
Temperature Controller Trainer Kit (SCR-Based)
A process control trainer kit that uses an SCR-based power control circuit to regulate heater temperature, used to teach closed-loop temperature control.
-
45
Temperature Measurement Trainer Kit
A trainer kit built around temperature sensors such as thermocouples or RTDs used to teach temperature measurement and signal conditioning principles.
-
46
Universal Programmer
A device used to read, write, and verify data on programmable memory chips and microcontrollers used in embedded systems development.
02 — Keep Exploring
Related
Planning a Instrumentation Engineering Project?
Tell us your requirement and we will get back to you.