08 — Chemical Engineering & Chemistry

Multipurpose Membrane Pilot Plant

A pilot-scale unit configurable for different membrane separation processes. Used to study permeate flux, solute rejection and the influence of operating pressure and feed conditions on membrane performance.

Send Enquiry

01 — Same Category

More in Chemical Engineering & Chemistry

  • 71

    Ultrasonic Probe Sonicator

    A probe-type ultrasonic processor that delivers high-intensity ultrasound directly into liquid samples. Used for cell disruption, emulsification, dispersion of particles and degassing in preparation work.

  • 72

    Level Measurement by Capacitance Method

    A trainer in which a capacitance probe in a tank infers liquid level from the change in capacitance between electrodes. Teaches the principle, calibration and characteristics of capacitive level sensing in process instrumentation.

  • 73

    Water Bath

    A thermostatically controlled bath providing uniform heating of samples and vessels at set temperatures for incubation and general laboratory heating.

  • 74

    Pelton Turbine Test Rig, 1 kW

    An impulse turbine test set with a 1 kW Pelton wheel, supply pump and instrumentation for flow, head, speed and brake load. Used to establish turbine performance characteristics and efficiency curves in fluid machinery laboratories.

  • 75

    UV Spectrophotometer, Split Beam

    A split-beam UV-visible spectrophotometer for quantitative absorbance and transmittance measurements; the split-beam optics monitor a reference portion of the beam to compensate for source drift. Used for concentration analysis and spectral scans in analytical laboratories.

  • 76

    Tray Dryer

    A cabinet dryer in which heated air is circulated over material spread on trays. Used to obtain drying rate curves and to study constant-rate and falling-rate drying periods.

  • 78

    Orbital Incubator Shaker

    A temperature-controlled chamber with an orbital shaking platform for culturing microorganisms and cells in flasks under controlled agitation and temperature.

  • 79

    BOD Incubator

    A low-temperature incubator, typically operated at 20 degrees C, for the standard biochemical oxygen demand test on water and wastewater samples. Also serves for general low-temperature incubation of cultures.

  • 80

    Dissolved Oxygen (DO) Meter

    A meter with probe for measuring dissolved oxygen concentration in water and wastewater samples. Essential for BOD determination, aeration studies and water quality monitoring.

  • 81

    Double Distillation Unit

    A water still that distils water twice in series to produce high-purity double-distilled water for analytical and preparative laboratory use.

  • 82

    Simple Batch Distillation Assembly

    A glass assembly of still pot, condenser and receiver for simple differential batch distillation. Used to study the separation of binary mixtures and verify the Rayleigh equation.

  • 83

    Absorption in Packed Bed

    A packed column with gas and liquid feed systems for counter-current gas-liquid contact. Used to study gas absorption, determine mass transfer coefficients and examine pressure drop and flooding behaviour.

All 96 Items in Chemical Engineering & Chemistry

Need Multipurpose Membrane Pilot Plant?

Tell us your requirement and we will get back to you.