08 — Chemical Engineering & Chemistry
Absorption in Packed Bed
A packed column with gas and liquid feed systems for counter-current gas-liquid contact. Used to study gas absorption, determine mass transfer coefficients and examine pressure drop and flooding behaviour.
01 — Same Category
More in Chemical Engineering & Chemistry
-
77
Multipurpose Membrane Pilot Plant
A pilot-scale unit configurable for different membrane separation processes. Used to study permeate flux, solute rejection and the influence of operating pressure and feed conditions on membrane performance.
-
78
Orbital Incubator Shaker
A temperature-controlled chamber with an orbital shaking platform for culturing microorganisms and cells in flasks under controlled agitation and temperature.
-
79
BOD Incubator
A low-temperature incubator, typically operated at 20 degrees C, for the standard biochemical oxygen demand test on water and wastewater samples. Also serves for general low-temperature incubation of cultures.
-
80
Dissolved Oxygen (DO) Meter
A meter with probe for measuring dissolved oxygen concentration in water and wastewater samples. Essential for BOD determination, aeration studies and water quality monitoring.
-
81
Double Distillation Unit
A water still that distils water twice in series to produce high-purity double-distilled water for analytical and preparative laboratory use.
-
82
Simple Batch Distillation Assembly
A glass assembly of still pot, condenser and receiver for simple differential batch distillation. Used to study the separation of binary mixtures and verify the Rayleigh equation.
-
84
Rotary Dryer
An inclined rotating drum through which wet solids cascade against a hot air stream. Used to study continuous convective drying, solids residence time and drying rate.
-
85
Shell and Tube Heat Exchanger (Water-Water)
A shell and tube exchanger operating with water on both sides, instrumented for inlet and outlet temperatures and flow rates. Used to determine the overall heat transfer coefficient, LMTD and effectiveness at varying flow conditions.
-
86
Reciprocating Pump Test Rig
A positive displacement pump test set with instrumentation for discharge, pressure and power input. Used to determine slip, volumetric efficiency and the performance characteristics of a reciprocating pump.
-
87
Hammer Mill
An impact mill in which swinging hammers shatter feed material against a screen for intermediate size reduction of brittle solids. Used to study impact grinding, product size distribution and grinding energy laws.
-
88
Cyclone Separator
A gas-solid separator that removes particulates from an air stream by centrifugal action in a cyclone body. Used to study collection efficiency and pressure drop as functions of flow rate and particle size.
-
89
Magnetic Separator
A separator that removes ferromagnetic particles from mixed solids using a magnetic field. Used in mineral processing laboratories to demonstrate magnetic concentration of ores.
Need Absorption in Packed Bed?
Tell us your requirement and we will get back to you.