08 — Chemical Engineering & Chemistry
BOD Incubator
A low-temperature incubator, typically operated at 20 degrees C, for the standard biochemical oxygen demand test on water and wastewater samples. Also serves for general low-temperature incubation of cultures.
01 — Same Category
More in Chemical Engineering & Chemistry
-
73
Water Bath
A thermostatically controlled bath providing uniform heating of samples and vessels at set temperatures for incubation and general laboratory heating.
-
74
Pelton Turbine Test Rig, 1 kW
An impulse turbine test set with a 1 kW Pelton wheel, supply pump and instrumentation for flow, head, speed and brake load. Used to establish turbine performance characteristics and efficiency curves in fluid machinery laboratories.
-
75
UV Spectrophotometer, Split Beam
A split-beam UV-visible spectrophotometer for quantitative absorbance and transmittance measurements; the split-beam optics monitor a reference portion of the beam to compensate for source drift. Used for concentration analysis and spectral scans in analytical laboratories.
-
76
Tray Dryer
A cabinet dryer in which heated air is circulated over material spread on trays. Used to obtain drying rate curves and to study constant-rate and falling-rate drying periods.
-
77
Multipurpose Membrane Pilot Plant
A pilot-scale unit configurable for different membrane separation processes. Used to study permeate flux, solute rejection and the influence of operating pressure and feed conditions on membrane performance.
-
78
Orbital Incubator Shaker
A temperature-controlled chamber with an orbital shaking platform for culturing microorganisms and cells in flasks under controlled agitation and temperature.
-
80
Dissolved Oxygen (DO) Meter
A meter with probe for measuring dissolved oxygen concentration in water and wastewater samples. Essential for BOD determination, aeration studies and water quality monitoring.
-
81
Double Distillation Unit
A water still that distils water twice in series to produce high-purity double-distilled water for analytical and preparative laboratory use.
-
82
Simple Batch Distillation Assembly
A glass assembly of still pot, condenser and receiver for simple differential batch distillation. Used to study the separation of binary mixtures and verify the Rayleigh equation.
-
83
Absorption in Packed Bed
A packed column with gas and liquid feed systems for counter-current gas-liquid contact. Used to study gas absorption, determine mass transfer coefficients and examine pressure drop and flooding behaviour.
-
84
Rotary Dryer
An inclined rotating drum through which wet solids cascade against a hot air stream. Used to study continuous convective drying, solids residence time and drying rate.
-
85
Shell and Tube Heat Exchanger (Water-Water)
A shell and tube exchanger operating with water on both sides, instrumented for inlet and outlet temperatures and flow rates. Used to determine the overall heat transfer coefficient, LMTD and effectiveness at varying flow conditions.
Need BOD Incubator?
Tell us your requirement and we will get back to you.