08 — Chemical Engineering & Chemistry
Level Measurement by Capacitance Method
A trainer in which a capacitance probe in a tank infers liquid level from the change in capacitance between electrodes. Teaches the principle, calibration and characteristics of capacitive level sensing in process instrumentation.
01 — Same Category
More in Chemical Engineering & Chemistry
-
66
Laboratory Refrigerator
A refrigerator for storing reagents, standards and samples at controlled low temperature in the laboratory.
-
67
Dead Weight Tester
A primary-standard pressure calibrator in which known masses on a piston of accurately known area generate reference pressures. Used for calibrating pressure gauges and transmitters in instrumentation laboratories.
-
68
Laboratory Drying Oven
A thermostatically controlled hot-air oven for drying glassware and samples and for moisture determination at set temperatures.
-
69
Muffle Furnace
A high-temperature furnace with a refractory-lined chamber for ashing, ignition and heat treatment of samples. Commonly used for ash content and loss-on-ignition determinations in fuel and materials analysis.
-
70
Electronic Weighing Scale
A digital balance for routine weighing of chemicals, samples and labware in the laboratory.
-
71
Ultrasonic Probe Sonicator
A probe-type ultrasonic processor that delivers high-intensity ultrasound directly into liquid samples. Used for cell disruption, emulsification, dispersion of particles and degassing in preparation work.
-
73
Water Bath
A thermostatically controlled bath providing uniform heating of samples and vessels at set temperatures for incubation and general laboratory heating.
-
74
Pelton Turbine Test Rig, 1 kW
An impulse turbine test set with a 1 kW Pelton wheel, supply pump and instrumentation for flow, head, speed and brake load. Used to establish turbine performance characteristics and efficiency curves in fluid machinery laboratories.
-
75
UV Spectrophotometer, Split Beam
A split-beam UV-visible spectrophotometer for quantitative absorbance and transmittance measurements; the split-beam optics monitor a reference portion of the beam to compensate for source drift. Used for concentration analysis and spectral scans in analytical laboratories.
-
76
Tray Dryer
A cabinet dryer in which heated air is circulated over material spread on trays. Used to obtain drying rate curves and to study constant-rate and falling-rate drying periods.
-
77
Multipurpose Membrane Pilot Plant
A pilot-scale unit configurable for different membrane separation processes. Used to study permeate flux, solute rejection and the influence of operating pressure and feed conditions on membrane performance.
-
78
Orbital Incubator Shaker
A temperature-controlled chamber with an orbital shaking platform for culturing microorganisms and cells in flasks under controlled agitation and temperature.
Need Level Measurement by Capacitance Method?
Tell us your requirement and we will get back to you.