08 — Chemical Engineering & Chemistry
Level Measurement by Air Purge Method
Instrumentation setup that demonstrates the bubbler or purge technique, in which liquid level in a vessel is inferred from the back pressure of air bubbled through a dip tube. Teaches calibration, hydrostatic level sensing and the handling of corrosive or slurry service liquids.
01 — Same Category
More in Chemical Engineering & Chemistry
-
04
Digital Conductivity Meter
Benchtop instrument with a dip-type cell that measures the electrical conductivity of aqueous solutions with digital readout. Used for conductometric titrations, electrolyte strength studies and routine water quality checks.
-
05
Stefan-Boltzmann Apparatus
Radiation heat transfer setup in which a heated hemispherical enclosure irradiates a small instrumented test disc, allowing the Stefan-Boltzmann constant to be evaluated from the measured temperature rise. Demonstrates the fourth-power law of thermal radiation.
-
06
Smoke Point Apparatus
Lamp-type apparatus that determines the maximum flame height at which kerosene or aviation turbine fuel burns without producing smoke. The smoke point indicates the aromatic content and burning quality of illuminating and jet fuels.
-
07
Cleveland Open Cup Flash & Fire Point Apparatus
Open cup assembly with controlled heating and a test flame for determining the flash point and fire point of lubricating oils and other high-flash petroleum products. Widely specified for oil quality assessment and safety classification.
-
08
Glass Fractional Distillation Assembly, 5-10 Litre
Borosilicate glass assembly comprising a distillation flask, packed fractionating column, condenser and receiver, supplied for batch charges of 5 to 10 litres. Used to separate miscible liquid mixtures and to study the effect of reflux and column height on separation.
-
09
Sieve Plate Distillation Column
Multi-stage tray column fitted with sieve plates and served by a reboiler, condenser and reflux arrangement for binary distillation experiments. Used to determine plate efficiency, the effect of reflux ratio and the number of theoretical stages.
-
11
Jar Test Apparatus
Multi-position paddle flocculator with variable speed drive and illuminated base for running parallel coagulation trials on water or wastewater samples. Used to establish the optimum coagulant dose, rapid mix speed and flocculation time before plant-scale dosing.
-
12
Turbidity Meter
Nephelometric instrument that measures the turbidity of water samples in NTU by detecting light scattered by suspended particles. Used for treated water monitoring, filtration performance checks and environmental engineering practicals.
-
13
Cloud & Pour Point Apparatus
Refrigerated bath with jacketed test jars and thermometers for determining the cloud point and pour point of petroleum oils and diesel fuels. Establishes the low-temperature handling and pumpability limits of a product.
-
14
Vibrating Screen
Motorised vibratory screening unit with stacked mesh decks that separates a granular feed into size fractions. Used in mechanical operations laboratories to study screen effectiveness, capacity and the effect of amplitude and feed rate.
-
15
Flow Control Trainer (Computer Controlled System)
Closed-loop flow control rig comprising a pump, control valve, flow transmitter and PC-based controller with data acquisition software. Used for controller tuning, step and load response studies and logging of process dynamics.
-
16
PID Controller Characteristics Apparatus
Setup for studying proportional, integral and derivative control actions individually and in combination on a laboratory process. Students observe offset, overshoot, settling time and stability as controller settings are varied.
Need Level Measurement by Air Purge Method?
Tell us your requirement and we will get back to you.