08 — Chemical Engineering & Chemistry
Digital Conductivity Meter
Benchtop instrument with a dip-type cell that measures the electrical conductivity of aqueous solutions with digital readout. Used for conductometric titrations, electrolyte strength studies and routine water quality checks.
01 — Same Category
More in Chemical Engineering & Chemistry
-
01
Abel Flash Point Apparatus
Closed-cup tester used to determine the flash point of low-flash petroleum liquids such as kerosene and aviation turbine fuel by heating the sample at a controlled rate and applying a test flame at intervals. Used in fuel testing laboratories to establish safe handling and storage temperatures.
-
02
Ramsbottom Carbon Residue Apparatus
Coking bulb and heated block assembly that determines the carbon residue left after evaporation and pyrolysis of a petroleum oil sample. The result indicates the coke-forming tendency of fuel oils and lubricating oils in service.
-
03
ASTM Distillation Apparatus
Standard distillation assembly with flask, condenser bath, heater and graduated receiver for determining the distillation characteristics of petroleum products. Students record vapour temperature against percentage recovered to plot the boiling range curve.
-
05
Stefan-Boltzmann Apparatus
Radiation heat transfer setup in which a heated hemispherical enclosure irradiates a small instrumented test disc, allowing the Stefan-Boltzmann constant to be evaluated from the measured temperature rise. Demonstrates the fourth-power law of thermal radiation.
-
06
Smoke Point Apparatus
Lamp-type apparatus that determines the maximum flame height at which kerosene or aviation turbine fuel burns without producing smoke. The smoke point indicates the aromatic content and burning quality of illuminating and jet fuels.
-
07
Cleveland Open Cup Flash & Fire Point Apparatus
Open cup assembly with controlled heating and a test flame for determining the flash point and fire point of lubricating oils and other high-flash petroleum products. Widely specified for oil quality assessment and safety classification.
-
08
Glass Fractional Distillation Assembly, 5-10 Litre
Borosilicate glass assembly comprising a distillation flask, packed fractionating column, condenser and receiver, supplied for batch charges of 5 to 10 litres. Used to separate miscible liquid mixtures and to study the effect of reflux and column height on separation.
-
09
Sieve Plate Distillation Column
Multi-stage tray column fitted with sieve plates and served by a reboiler, condenser and reflux arrangement for binary distillation experiments. Used to determine plate efficiency, the effect of reflux ratio and the number of theoretical stages.
-
10
Level Measurement by Air Purge Method
Instrumentation setup that demonstrates the bubbler or purge technique, in which liquid level in a vessel is inferred from the back pressure of air bubbled through a dip tube. Teaches calibration, hydrostatic level sensing and the handling of corrosive or slurry service liquids.
-
11
Jar Test Apparatus
Multi-position paddle flocculator with variable speed drive and illuminated base for running parallel coagulation trials on water or wastewater samples. Used to establish the optimum coagulant dose, rapid mix speed and flocculation time before plant-scale dosing.
-
12
Turbidity Meter
Nephelometric instrument that measures the turbidity of water samples in NTU by detecting light scattered by suspended particles. Used for treated water monitoring, filtration performance checks and environmental engineering practicals.
-
13
Cloud & Pour Point Apparatus
Refrigerated bath with jacketed test jars and thermometers for determining the cloud point and pour point of petroleum oils and diesel fuels. Establishes the low-temperature handling and pumpability limits of a product.
Need Digital Conductivity Meter?
Tell us your requirement and we will get back to you.