15 — Mining Engineering
Model of Keps
A model of keps, the retractable supports that hold the cage at rest during decking at the pit top or inset. Illustrates cage decking practice and safety arrangements in shaft winding instruction.
01 — Same Category
More in Mining Engineering
-
35
Core Cutting and Grinding Machine
A machine for cutting drilled rock cores to length and grinding their ends flat and parallel to specimen standards. Prepares cores for uniaxial and triaxial compression testing in the rock mechanics laboratory.
-
36
Slake Durability Apparatus
A rotating-drum apparatus that determines the slake durability index of rock, quantifying its resistance to wetting-and-drying breakdown. A standard index test for classifying weak and argillaceous rocks.
-
37
Brazilian Test Apparatus
A loading fixture for the Brazilian (diametral compression) test, which determines the indirect tensile strength of rock discs. A standard rock mechanics test used in strength characterization coursework.
-
38
Point Load Index Tester
A portable press that loads rock cores or lumps between conical platens to determine the point load strength index. Provides a rapid field and laboratory estimate of uniaxial compressive strength for rock classification.
-
39
Magnetic Unlocker for Flame Safety Lamp
A magnetic device for opening the locked bonnet of a flame safety lamp for assembly, cleaning, and examination. Used in mine environment laboratories when teaching the construction and statutory testing of safety lamps.
-
40
Gas Chamber Setup
A sealed test chamber in which known concentrations of firedamp or other gases are produced to demonstrate flame safety lamp behaviour and calibrate or verify gas detectors. Central to practicals on mine gas testing.
-
41
Turbine Pump
A multistage turbine-type pump used for dewatering, lifting water from sumps and shaft bottoms against high heads. Demonstrates mine drainage machinery, pump characteristics, and dewatering system design.
-
42
Working Model of Pit Top and Pit Bottom Layout
A working model showing the arrangement of decking platforms, tracks, and cage handling facilities at the shaft top and bottom. Used to teach shaft layout, tub circulation, and winding operations.
-
44
Working Model of Gate Belt Conveyor with Loop Take-Up and Scraper Chain Conveyor (Set of 2)
A set of two working models: a gate belt conveyor with loop take-up arrangement and a scraper chain conveyor as used at faces and gate roads. Demonstrates underground coal clearance and conveyor tensioning principles.
-
45
Working Model of Direct Rope Haulage
A working model of a direct rope haulage system in which a single rope hauls tubs up an incline with gravity return. Used to teach rope haulage layouts, safety devices, and their operating limits.
-
46
Working Model of Headgear
A working model of a mine headgear showing the headframe, sheave wheels, and rope path over the shaft. Supports instruction in winding installations and the structural arrangement above a mine shaft.
-
47
Working Model of Different Types of Koepe Winding
A working model demonstrating friction (Koepe) winding arrangements, including tower-mounted and ground-mounted configurations with balance ropes. Used to compare winding systems and explain friction winding principles.
Need Model of Keps?
Tell us your requirement and we will get back to you.