11 — Electrical & Electronics
Basic Electrical Circuits Trainer Kit
Patch-cord trainer for building series, parallel and series-parallel circuits and verifying Ohm's and Kirchhoff's laws with on-board meters. Introduces circuit construction and measurement discipline to first-year students.
01 — Same Laboratory
More in Core Electrical Laboratory
-
009
Network Theorem Trainer Kit
A circuits trainer used to experimentally verify network theorems such as Thevenin's, Norton's, superposition, and maximum power transfer on resistive circuits.
-
010
Phase Sequence Indicator
An instrument used to determine the phase sequence (R-Y-B) of a three-phase AC supply before connecting motors or equipment.
-
011
Rheostat (Range Set: 0-50Ω to 0-500Ω)
A set of wire-wound rheostats spanning 0-50 Ω to 0-500 Ω at current ratings from 1 A to 5 A, used as variable resistive loads and current-limiting elements in electrical circuits experiments.
-
012
Electrical Engineering Training / Demonstration Panel
Wall- or bench-mounted demonstration panel carrying live wiring layouts, protective devices and metering for teaching the fundamentals of electrical engineering. Used in first-year diploma and degree laboratories to introduce circuit construction, measurement and safe working practice.
-
013
AC/DC Variable Power Supply
Bench supply delivering continuously variable AC and DC output with metered voltage and current and short-circuit protection. Serves as the general-purpose source for circuit, machines and electronics experiments.
-
014
Digital Multimeter
Bench or handheld digital multimeter for voltage, current, resistance, continuity, diode and frequency measurement, with auto-ranging and true-RMS reading. The core measuring instrument of every electrical laboratory.
-
015
Digital Clamp Meter
Clamp-on meter for measuring AC and DC line current without breaking the circuit, with voltage, resistance and power-factor functions. Used for load surveys, machine testing and maintenance practicals.
-
016
Digital Wattmeter (Single and Three Phase)
Digital wattmeter displaying active, reactive and apparent power together with power factor for single- and three-phase circuits. Replaces the analogue dynamometer wattmeter in machine and power-system experiments.
-
017
Digital Energy Meter
Static energy meter with digital display and pulse output for measuring and logging energy consumption in single- and three-phase circuits. Used in metering, tariff and energy-audit practicals.
-
018
Four-Channel Digital Oscilloscope, 100 MHz
Four-channel digital oscilloscope of 100 MHz bandwidth or higher, with deep memory, FFT and automatic measurements. Suited to power-electronics and three-phase work where gate, line and load waveforms must be viewed together.
-
019
RLC Decade Box (Resistance, Inductance and Capacitance)
Set of switched decade boxes providing precise, repeatable resistance, inductance and capacitance values. Used to build and tune networks, bridges and filter circuits without soldering.
-
021
Phase Angle and Frequency Meter
Instrument that displays supply frequency and the phase angle between voltage and current in single- or three-phase circuits. Supports power-factor, load-characteristics and synchronisation experiments.
Need Basic Electrical Circuits Trainer Kit?
Tell us your requirement and we will get back to you.